Shoulder Pad to fit various shoulder strap widths:
SP15 fits 40mm (1,1/2")
SP20 fits 50mm (2")
3mm top grain leather with neoprene gripper and press stud attachment.
Shoulder Pads SP15 USD 27.00
521201 - SP15 Shoulder Pad, Black leather
521270 - SP15 Shoulder Pad, Tan leather
Simplies
Dimensions in Inches
70/140 = 2,3/4 x 5,1/2ins
80/170 = 3,1/8 x 6,5/8ins
90/195 = 3,1/2 x 7,3/4ins
100/160 = 4 x 7,5/8ins
100/220 = 4 x 8,3/4ins
100/270 = 4 x 10,3/4ins
130/170 = 5,1/8 x 6,5/8ins
These simple little pouches are ideal to put your sunglasses, lenses, films or pens in and are excellent for keeping sand and dust at bay.
Simplies are available in seven sizes, the first number relates to the diameter of the base, the second to the height, in centimetres. For those of you with an imperial bent, we have listed the sizes in inches below.
Dimensions
6-12 - W150 x D60 x H120mm
W6 x D2,3/8 x H4,5/8ins
7-15 - W150 D70 x H150mm
W6 x D2,3/4 x H6ins
8-15 - W150 x D80 x H150mm
W6 x 3,1/8 x H6ins
8-18 - W150 x D80 x H180mm
W6 x 3,1/8 x H7ins
9-15 - W150 x D90 x H150mm
W6 x D3,1/2 x H6ins
9-18 - W150 x D90 x H180mm
W6 x D3,1/2 x H7ins
9-21 - W150 x D90 x H210
W6 x D3,1/2 x H8,1/4ins
10-15 - W150 x D100 x H150mm
W6 x D4 x H6ins
10-18 - W150 x D100 x H180mm
W6 x D4 x H7ins
10-21 - W150 x D100 x H210mm
W6 x D4 x H8,4/4ins
11-15 - W150 x D110 x H150mm
W6 x D4,1/4 x 6ins
11-18 - W150 x D110 x H180
W6 x D4,1/4 x H7ins
Superflexes are used to seperate equipment inside your Billingham Bag. Superflex partitions are 150mm (6 inches) long but vary in width and height according to their number. The dividers are positioned to provide one square comparment.
Designed for use on the following models, 106, 206, 306, 225, 335, 445, Packington and attaches to the five loops of these models. The BPH provides the facility to turn a shoulder bag into a rucksack. Please remember though that any accessory such as this cannot be expected to perform in quite the same way as a purposed designed rucksack.
Back Pack Harness USD 70.00
521501-01 - Black Web, Black leather trim & Nickel fittings
521501-70 - Black Web, Tan leather trim & Brass fittings
521533-70 - Khaki Web, Tan leather trim & Brass fittings
A usefull accessory which allows an adjustable 1" waist strap to be attached to the slings on many Billingham bags. Consists of an adjustable sling and two fixing points, the attachments (pictured left above) which attach onto the shoulder sling by press studs.
Waist Strap & Attachments USD 60.00
521901-01 - Black web, Black leather trim & Nickel fittings
521901-70 - Black web, Tan leather trim & Brass fittings
521933-70 - Khaki web, Tan leather trim & Brass fittings
The whole, non-roller buckles used on our Hadley range should prevent the fastening tabs from accidentally coming undone and getting lost, but just in case, we include them as an accessory.
In use, we recommend the strap is adjusted to length by using the buckle; the Quick Release System, i.e. the teardrop shaped hole which slips over the brass stud, is used for regular opening and closing of the fastening. This way the straps are unlikely to get lost and you will gain maximum benefit from the QRS. The straps are sold in pairs.